Matek MATEKSYS F405-SE BetaFlight Flight Controller for DIY Drones
SKU: BRT-565832$ 75.59
- Firmware: INAV: MATEKF405SE BetaFlight: MATEKF405SE ArduPilot: MATEKF405-WING Physical: Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm Dimensions: 36 x 46 mm Weight: 10g F405-SE description: MCU: 168MHz STM32F405RET6 IMU: MPU6000 (SPI) Baro: DPS310 (I2C) OSD: AT7456E (SPI) Blackbox: MicroSD slot (SPI) VCP & 6x Uarts, 1x Softserial_Tx supported 9x PWM outputs (7x Dshot compatible with BF/INAV) 2x I2C 3x ADC (voltage, current, RSSI) 4x RX6 pad(one per corner) for BLheli32 ESC telemetry 4x individual ESC power/signal pads 1x Group of G/S1/S2/S3/S4 pads for 4in1 ESC Signal/GND 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red) Built in inverter on UART2-RX for SBUS input PPM/UART Shared: UART2-RX Vbat filtered output power for VTX Camera control: Yes Smartaudio & Tramp VTX protocol: Yes DJI FPV OSD protocol: Yes WS2812 Led Strip : Yes Beeper : Yes RSSI: Yes PDB Specifications: Input: 6~36V (2~8S LiPo) w/TVS protection PDB: 4x35A (Max.4x46A) BEC: 5V 2A cont. (Max.3A) LDO 3.3V: Max.200mA Current Sensor 184A (Scale 179 in INAV/BF) Battery Voltage Sensor: 1K:10K